In this post we will discuss about how you can Install CoolUI 6.0 Rom For Coolpad Dazen 1. The device was released on May’2015. Coolpad Dazen 1 is powered by 1.2 GHz quad-core Qualcomm Snapdragon 410 processor and it has 2 GB of RAM. The internal memory has 8 GB. You can extended the internal memory up to 32 GB with the help of SD card. The 5 inches touchscreen with 720 x 1280 pixels resolution will give pleasure to your eyes. To take better snap and selfie the device featured 8 megapixel primary and 5 megapixel secondary camera. The device is powered by removable Li-Ion 2500 mAh battery.
The CoolUI 6.0 Rom is focused on mainly battery, performance And stability. If you want to test this Rom on your device then you need to flash it. Here are the instruction.
CoolUI 6.0 Rom For Coolpad Dazen 1
Bugs of CoolUI 6.0 Rom For Coolpad Dazen 1:
- Charge your device at least 50 % before going through the procedure.
- Take a Backup of your device before starting the process.
- Do at your own risk.
Files needed for CoolUI 6.0 Rom For Coolpad Dazen 1:
- At first you need to unlock BootLoader of your device. If you do not have Unlock Bootloader then Follow below link which helps you to unlock the Bootloader of your device.
- Then you have to install the TWRP Recovery for Coolpad Dazen 1. If you do not have custom recovery then Follow below Link.
⇓⇓ Download CoolUI 6.0 Rom For Coolpad Dazen 1 from here ⇓⇓
- Gapps file
Procedure of Install CoolUI 6.0 Rom For Coolpad Dazen 1:
- At first download the CoolUI 6.0.zip file from the above link.
- Switch Off your device and open recovery mode by pressing “volume up + power key”continuously at the same time (For most of the devices) and “volume up + menu key + power key” (For samsung devices and for those devices which have menu key).
- OR you can Download and install Quick Boot application and then open it. There you will find an option to go to recovery mode. Tap on it and you will get to the recovery menu.
- In Recovery Click the “wipe and format” option then Wipe -> Data, System, Cache and dalvik cache via recovery.
- From main menu navigate to the CoolUI 6.0.zip file which you already downloaded from above link.
- Select CoolUI 6.0 Rom to flash.
- Now Install The GAPPS file by going to the Custom recovery as given in the above and locate the GAPPS.zip file and install it.
- Reboot your device.
You have successfully installed CoolUI 6.0 Rom For Coolpad Dazen 1.
- [ROM] Flyme os 5.1.5 Rom For Coolpad Dazen 1
- [ROM] Flyme os 3.0 Rom For Coolpad Dazen 1
- [ROM] MIUI 8.0 Rom For Coolpad Dazen 1
- [ROM] AOSP KK Rom For Coolpad Dazen 1
- [ROM] STOCK COOL UI 6.0 Rom For Coolpad Dazen 1
- Emui 3.1 Android 5.1 Custom Rom For Coolpad Note 3
You can get more information of your Coolpad Device.
Facing problem leave a comment below: