[Custom Recovery] Twrp For Lyf Water 5 LS-5007

Twrp For Lyf Water 5 LS-5007Today we will talk about Twrp For Lyf Water 5 LS-5007. The device was released on May 2016. The device is powered by Qualcomm Snapdragon 410 MSM8916 Quad-Core Processor and it has 2 GB of Ram. The internal memory of the device is 16 GB. The 5 inches touchscreen with the resolution of 720×1280 pixels will give pleasure to your eyes. To take good snap and selfies the device featured 13 megapixels rear and 5 megapixel front camera. The device is powered by 2920 mAh removable battery.

If you need a custom recovery for your device then Twrp is recommended. To install this on your device just follow the steps describe below.

Twrp For Lyf Water 5 LS-5007

Files Needed:

Note:

  • Charge your device at least 50 % before going through the procedure.
  • Take a Backup of your device before starting the process.

Guide: How to Backup and Restore ROM on Android (With out Root).

  • Do at your own risk.

Install Twrp By Using Flashify On Lyf Water 5 LS-5007:

Steps need to do:

  • You need to root your device. 
  • If your device is not rooted and If you want to know how to root then see the below post

Guide: Root For Lyf Water 5 LS-5007

  • Now you need to follow the below steps.

Procedure of Installation:

  • Download the TWRP .img file from the link.
  • Download and install Flashify From Google play store.
  • Copy TWRP to your device.
  • Then open Flashify and browse the TWRP file and install.
  • It will take few minutes.
  • Enjoy.

For screenshot or Details of the procedure follow the link given below.

Guide: Install Twrp By Using Flashify On Android Devices

If this process doesn’t work then follow the process described below.

Install Twrp By Using ADB Fastboot On Lyf Water 5 LS-5007:

  • At first You need to Install ADB & fastboot on your computer to Install TWRP on your device.

Guide: Install ADB & fastboot on your computer.

  • You need to Install USB driver of your phone on your computer.

Guide: Usb Driver of All Android Devices.

  • You Need To Enable USB Debugging on your phone.

Guide: Enable USB Debugging on your phone

  • Download the TWRP file from the link and save it on a folder and renamed the file to recovery.img .
  • Then in the extracted folder press Shift and right click at same time to open the Command prompt.
  • After that you have to connect your phone to your PC.
  • In the command prompt Type the following and hit enter.

adb devices

  • It will Show you the code of your devices.Then type the below command.

adb reboot-bootloader

  • It will get your device into bootloader option. Then type the below command.

fastboot devices

  • you will see your device there.Your device code will be arrive there.Then write this command on your command prompt to flash recovery file.

FASTBOOT FLASH RECOVERY recovery.img

  • Then Reboot your device or copy and paste the below code to the command prompt and hit enter.

fastboot reboot

  • Enjoy

If face any problem then follow the link given below.

Guide: Install TWRP Using ADB-Fastboot on Android Device

Facing problem?

Leave a comment below. Share this post for help us to grow visitors.

2 Comments

Leave a Reply

%d bloggers like this: