[Custom Recovery] TWRP 3.0.2 For Huawei P9 Plus

TWRP 3.0.2 For Huawei P9 PlusToday we will talk about the procedure of installing TWRP 3.0.2 for Huawei P9 Plus. The device was released on April, 2016. Huawei P9 Plus has 5.5 inches touchscreen with 1080 x 1920 pixels resolution. The device runs Android OS, v6.0 (Marshmallow)operating system with HiSilicon Kirin 955 octa-core processor and it has 4 GB RAM. 64 GB internal memory can be expanded up to 256 GB with the help of SD card. 12 MP primary & 8 MP secondary camera will help you to take good snap and selfies. The device is powered by 3400 mAh Li-po non-removable battery.

Do You need a recovery for your Huawei P9 Plus? We know you need this. Just follow some easy steps for install TWRP on your device.

TWRP 3.0.2 For Huawei P9 Plus

Related Post:

Features of TWRP 3.0.2:

  • boot.img backup 
  • Emmc repair
  • Uboot backup
  • Nvram backup
  • Recovery.img backup
  • TWRP features works
  • More

Files Needed:


  • Charge your device at least 50 % before going through the procedure.
  • Take a Backup of your device before starting the process.

Procedure of Install TWRP 3.0.2 For Huawei P9 Plus:

  • To know how to use ADB to Install TWRP in details you can goto the ADB page.
  • At first Download the file recovery.img from the above link and save it on a folder.
  • Download ADB minimal and extract it. Copy the TWRP Image file to the extracted ADB folder.
  • Then in the extracted folder press Shift and right click at same time to open the Command prompt.

TWRP 3.0.2 For Huawei P9 Plus 1

  • Now switch of your device and go to fastboot bootloader by pressing Volume Down + Power at the same time.
  • After that you have to connect your phone to your PC.
  • In the command promt Type the following and hit enter.

    fastboot devices

    you will see your device there.Your device code will be arrive there.

    Then write this command on your command prompt to flash recovery


TWRP 3.0.2 For Huawei P9 Plus 2

  • Then Reboot your device or cpou and paste the below code to the command prompt and hit enter.

“fastboot reboot”

  • Enjoy

What Next?

Related Post:

If you face any problem then leave a comment below. Please share the post and help us to grow more visitors.

Leave a Reply

******* hosting raja *************
%d bloggers like this: